Meta Pixel Fabric Cutting Software & Automatic Fabric Cutting Machine
Laser Technology · Up to 8 Layers · CAD Connected

Automatic Fabric Cutting Machine
& Fabric Cutting Software

Transform your production speed with laser precision. Cut any garment in under 60 seconds, with up to 8 fabric layers at once - driven straight from your pattern by our own fabric cutting software. For boutique work there is a smaller blouse cutting machine built on the same head.

Book Free Demo View Specs
Under 60 seconds/garment
8-layer cutting
5-15% fabric savings
Laser Cutter
Precision fabric cutting system
<60s
Per Garment
8
Layers at Once
130W
Max Power
15%
Less Fabric Waste
Workflow

How automatic fabric cutting
works with CAD

01
Generate Pattern

Use Fashion Dot's CAD software to generate an accurate digital pattern based on exact customer measurements.

02
Optimize Layout

The software automatically nests pattern pieces to use the absolute minimum amount of fabric, saving 5-15% material.

03
Send & Cut

The digital file is sent to the cutting machine. The laser precisely traces and cuts the pattern at high speed with flawless accuracy.

Benefits

Benefits over manual cutting

Six reasons why professional tailors and factories are switching to laser cutting.

01

Unmatched Speed

Cut a complete multi-piece garment like a blazer in under 60 seconds. A master cutter takes 45-90 minutes for the same work.

02

Flawless Precision

The laser follows exact digital X/Y coordinates. Patterns fit together flawlessly every time - no human variation.

03

Sealed Edges

The laser heat seals synthetic and blend fabric edges automatically - zero fraying, fewer finishing steps.

04

Multi-Layer Cutting

Cut up to 8 layers of fabric simultaneously. Scale output instantly without additional staff or equipment.

05

Reduced Labor Dependency

Stop relying on scarce, expensive master cutters. Any staff member can operate the machine after basic training.

06

Minimal Fabric Waste

CAD nesting algorithms pack pattern pieces tighter than any human, saving 5-15% on raw fabric costs every month.

Technical Specifications

Machine specifications

Specification Value Notes
Bed Size Options 1600mm - 3000mm Multiple widths available
Laser Power 80W - 130W Depends on fabric type
Maximum Layers Up to 8 layers Fabric dependent
Cutting Speed Up to 1200mm/min Per axis
Positioning Accuracy ±0.1mm Repeatability
Supported Fabrics Cotton, Silk, Polyester, Blends Natural & synthetic
Software Integration Fashion Dot CAD (native) Also supports DXF/PLT
Power Requirement 220V / 50Hz Standard Indian mains
Use Cases

Ideal for every business size

Home Tailors & Startups

Scale up operations without hiring cutting staff. Ensure perfect fittings from day one and build a reputation for quality quickly.

Mid-Range Boutiques

Handle rapidly growing custom orders easily. Cut delicate silks, heavy embellishment fabrics and everything in between with consistent results.

Garment Factories

Achieve enterprise-level production using 8-layer cut capability and roll-feeder attachment for continuous high-volume cutting.

In practice

What changes in a working day

The specification sheet describes the machine. This is what a shop notices in the first week of running one.

The marking step disappears

There is no chalk, no paper pattern to weight down and draw around, and no second pass to check the line before cutting. The graded pattern goes from the software to the head, and what was drawn is what gets cut - so the cutter's time moves from marking to laying and handling.

The cloth goes further

Pieces are nested before the cut path is sent, so the layout is worked out to waste as little as possible rather than being arranged by eye under time pressure. On a repeat order that saving lands on every single lay, which is where it adds up.

Edge finishing comes out of the process

The cut seals as it goes, so pieces come off the bed without fraying and go straight to stitching. On synthetics and blends this removes a whole handling step rather than speeding one up.

Volume stops being a staffing problem

Multi-layer cutting means a stack goes through in one pass, so doubling an order does not mean doubling the hands at the table. That is the difference between turning down a bulk uniform order and taking it.

Which shop it suits

Fabric cutting software for an Indian tailoring shop

The machine and the software are sold together, and the question that decides whether they are worth it is not the specification - it is how much cutting your shop actually does.

Fabric cutting software for a boutique

A boutique cutting single garments is buying accuracy, not speed. The software nests the pieces and the laser follows exact digital coordinates, so a blouse or a kurti is cut the same way every time regardless of who is at the table - and on synthetics the edge is heat-sealed, which removes a finishing step on every piece. For work at this volume the smaller bed is the sensible size.

Fabric cutting software for uniform and bulk orders

This is where the numbers move. Up to 8 layers are cut at once, a full multi-piece garment takes under 60 seconds against 45 to 90 minutes by hand, and the nesting saves 5 to 15% of the cloth on every lay. On a school or company uniform contract that fabric percentage is usually the margin, which is why bulk work pays the machine back faster than boutique work does.

Fabric cutting software for a factory floor

At production scale the roll-feeder attachment keeps the machine running continuously and the larger bed sizes take the full lay. The point at this level is not the cutting speed at all - it is that output stops depending on hiring scarce, expensive master cutters. Any trained staff member operates it.

What it costs in India

Price depends on two things: the bed size, from 1600mm to 3000mm, and the laser wattage, from 80W to 130W. Heavier fabrics and thicker lays want more power; a boutique cutting cotton and georgette does not. Current package pricing is published on our tailoring CAD software price page, and the demo will show you the difference on your own cloth before you choose.

How quickly it starts earning

Installation and staff training are completed in a single visit, and most shops are running production within 24 hours of the machine arriving. There is no long commissioning period and no separate software installation to schedule - the fabric cutting software is the same CAD suite that drives our printers and plotters, so a shop already drafting on Fashion Dot sends patterns straight to the cutter.

FAQ

Frequently Asked Questions

What fabric cutting software drives the machine?

The machine is driven by our own fabric cutting software - the same Tailoring CAD suite used across our printers and plotters. The fabric cutting software takes your graded pattern, nests the pieces to waste the least cloth, and sends the cut path to the head. Because one fabric cutting software runs every machine, a pattern drafted once can be printed, plotted, projected or laser-cut without redrawing it.

What is the price range?

Prices vary depending on bed size (1600mm to 3000mm) and laser wattage (80W to 130W). Contact us for a custom quote based on your specific production requirements.

Does it require heavy maintenance?

No. The machines are designed for robustness. Weekly cleaning of the lenses and mirrors, and occasional consumable replacement is all that's required. Our team handles annual servicing.

Which fabrics does it support?

The machine supports cotton, silk, polyester, linen, georgette, chiffon and most blended fabrics. Natural fibres are cut cleanly; synthetics and blends also benefit from sealed edges. Thick leather and denim may require specific wattage settings.

How long does installation take?

Our technicians visit your premises and complete the full installation and staff training in a single day. Most businesses are fully operational within 24 hours of delivery.

Which bed size should I choose?

Beds run from 1600mm to 3000mm. Choose by the width of the lay you cut, not by the garment - a shop cutting single blouse and shirt panels needs far less width than a unit laying full-width rolls for uniform runs.

Does the software nest the pattern to save cloth?

Yes. The pieces are nested automatically before the cut path is sent to the head, so the layout wastes as little cloth as possible. On repeat orders that saving is on every lay, not just the first.

Can it cut several layers at once?

Yes. Multi-layer cutting is what changes the economics on volume work - the machine cuts a stack in one pass, so the time per piece keeps falling as the stack gets deeper.

Do the edges need finishing afterwards?

No. The cut seals the edge as it goes, so pieces come off the bed without fraying or unravelling and the edge finishing step disappears from the process.

Who services the machine?

Your team does the weekly cleaning of the lenses and mirrors; our team handles the annual servicing. Consumables are replaced occasionally rather than on a schedule.

How soon can we start production after delivery?

Within a day. Installation and staff training are completed in a single visit, and most businesses are running production within 24 hours of the machine arriving.

What is the fabric cutting software and machine price in India?

It depends on the bed size, from 1600mm to 3000mm, and the laser wattage, from 80W to 130W. Heavier fabrics and thicker lays need more power; a boutique cutting cotton and georgette does not. Current package pricing is published in full on our tailoring CAD software price page.

Is fabric cutting software useful for a small tailoring shop?

Yes, but for a different reason than a factory. A small shop is buying accuracy and a sealed edge rather than throughput - the same garment cut the same way whoever is at the table, with a finishing step removed on synthetics. The smaller bed size is the sensible choice at that volume.

Can the software cut blouse and churidar patterns?

Yes. The pattern comes from the same Tailoring CAD suite that drafts blouse, churidar, kurti, gents and uniform models, so anything you can draft you can send to the cutter. For boutique blouse volume there is also a smaller blouse cutting machine built on the same head.

How much fabric does the nesting actually save?

Between 5 and 15% of the cloth, depending on how the pieces pack together. On a single garment that is small; on a bulk uniform lay repeated every month it is usually the difference the machine is bought for.

Does it work with patterns from other CAD software?

The machine is driven by our own fabric cutting software, the same Tailoring CAD suite used across our printers and plotters. If your patterns are drafted elsewhere, ask on the demo call - what transfers cleanly depends on the format your current software exports.

Cut faster, waste less,
grow more.

Book a free demonstration and see the automatic fabric cutting machine in action at your shop or via video call. No commitment required.

Book Free Demo +91 84486 38639
Free demo · No commitment · On-site or online
Call WhatsApp Book Demo