Blouse cutting machine - laser cutting machine for tailoring

Yes - that is how most of our customers use it. As a blouse cutting machine it cuts front, back, katori, sleeve, patti and lining from a graded CAD pattern, sealing every edge as it cuts, so the pieces go straight to the stitching table.

It depends on the bed size (600x900mm, 1200x900mm or 1600x1000mm) and laser power (60W to 130W). We quote per configuration and offer in-house EMI - call +91 84486 38639 for the current blouse cutting machine price.

Cotton, polyester, silk, nylon, lycra, denim, canvas and most synthetic blends. Not suitable for leather, PVC, or materials containing chlorine.

Modern CO2 lasers can be fine-tuned for delicate fabrics like silk and chiffon. Power levels are adjustable per material type.

Fashion Dot laser cutters receive pattern files directly from the CAD software via USB or network connection. No manual setup needed per cut.

Regular cleaning of the laser lens and mirror, and periodic replacement of the laser tube (typically every 2-3 years of heavy use). Our technicians provide scheduled maintenance.

Everything a tailoring shop normally handles — cotton, silk, georgette, net, tissue and most blends, in single or stacked layers depending on the model. Heavy denim and leather need a machine specified for them, so say what you cut when you ask for a quote.

The laser seals synthetic and blended edges as it cuts, which is the main reason net and tissue work becomes practical. Pure cotton still frays a little, less than a scissor cut.

A fixed position, power, and extraction for the fumes. This is the practical difference between a laser and a plotter: a plotter can sit anywhere, a laser needs a planned corner.

Roughly forty and above. Below that the machine idles and a pattern printer or plotter pays back faster. Ask for the payback to be worked out on your own order book, not a sample figure.

There is no single figure - it is set by the bed size you need, from 600x900mm to 1600x1000mm, and the laser power, from 60W to 130W. We quote per configuration and offer in-house EMI. Call +91 84486 38639 and we will price the configuration your shop actually needs rather than the largest one.

On time, clearly: a ladies saree blouse is about five minutes by hand and about thirty seconds on the laser. But the bigger difference is that the edge is sealed as it cuts and the accuracy is the same for every piece, so marking, scissor variation between staff and edge finishing all come out of the job.

Roughly forty garments a week is the line. Below that the machine idles and a pattern printer or plotter pays back faster. Above it, and especially on cutwork blouses, it usually pays back on labour and re-cuts alone.

Choose by the largest single piece you cut, not the garment. A blouse front, katori or sleeve sits comfortably on the 600x900mm bed; a nested layout of several panels wants 1200x900mm or 1600x1000mm.

Yes. Delivery, installation and training happen at your shop, handled by the branch nearest you - Coimbatore, Chennai, Bangalore, Hyderabad or Pune - and the same branch handles service afterwards.